Quartz Clock Second Hand

Posted on    Posted in  turned_in_not  

Quartz Clock Second Hand

Second hands for quartz clock movements that take a battery. The second hands come in Black / Gold / or Red. Measure from the mounting post to the end of the long side pointer of the hand to get the correct length. If it is a bit too long, snip the tip with a pair of scissors. Easy to install, the hand has a post on the bottom that fits only by friction onto the quartz clock movement. These second hands are optional on all mini movements, the clock can run with or without them.


↑ Back to top

Quartz Clock Movement Second-Hand

Posted on    Posted in  turned_in_not  

Quartz Clock Movement Second-Hand

These second-hands fit clock movements that take a battery. The second hands come in Black / Gold / or Red. Measure from the mounting post to the end of the long side pointer of the hand to get the correct length. If one needs to be a bit shorter, use a pair of scissors to snip the tip. Easy to install, the hand has a post on the bottom that fits only by friction onto the quartz clock movement. These second hands are optional on all mini movements, the clock can run with or without them.


↑ Back to top

Battery Clock Second Hand

Posted on    Posted in  turned_in_not  

Second Hands

Second hands for quartz clock movements that take a battery. The second hands come in Black / Gold / or Red. Measure from the mounting post to the end of the long side pointer of the hand to get the correct length. If it is a bit too long, just snip the tip with a pair of scissors. Easy to install, the hand has a post on the bottom that fits only by friction onto the quartz clock movement. These second hands are optional on all mini movements, the clock can run with or without them.


↑ Back to top

Serpentine Mechanical Clock Hands

Posted on    Posted in  turned_in_not  
Mechanical Clock Hands are the arms that point to the numbers 1 to 12 so you know what time of day it is. Clock hands come in a variety of lengths.
Mechanical Clock HandsHand RemovalHand InstallationOrdering Mech HandsChime On Time FixAbout Hand Nuts

Please view these information tabs to help with getting the Mechanical Clock Hands.

Removing Mechanical Clock Hands

Removing Mechanical Clock Hands is fast and easy to do. The following are hand removal instructions for German mechanical movements post WW2.

German Post WW2 wall, mantle and floor models

Removing mechanical clock hands for post WW2, mantle and floor clocks is quite simple. Turn the hand nut to the left while holding the minute hand with fingers. Use some small needle nose pliers to loosen the nut first. Once the nut is loose, turn it with fingers until it comes off. Then the minute hand will be able to wiggle straight off its square arbor and off of the clock. The hour hand is a friction fit, so just twist the hour hand back and forth and pull toward you until it comes off. If having a second hand bit, that is only a friction also, so just grab it with fingernails, twist pull off.

American Antique time and strike

These type of movements come in two styles. If there is a minute hand nut, the first style is the same as above. Be very careful not to lose this hand nut. They are very hard to find and replace. The second style of mechanical clock hands will have a pin holding the minute hand on instead of a nut. This pin tapers, meaning it's fat on one side and skinny on the other. Just grab the fat side with needle nose pliers and yank the pin out. The minute hand will fall out with a washer. Save the washer and the tapered pin for ease of reinstalling the hands. If these items happen to get lost, Clockworks offers washers and taper pins for purchase, as well as replacement mechanical clock hands.

The content of this website is copyright by Clockworks and written by James Stoudenmire in year 2020

German Mechanical Clock Hand Installation

The installation of the clock hands on a German mechanical movement is reverse of removal. If either the movement was replaced, or the hands are new, the minute hand must be adjusted. This is so it will point to the correct time when it chimes.

Installing the hour hand

First comes the hour hand as a friction fit. Put the hand on its round post and twist and push toward the front front of the dial. Be sure it is not in contact with the dial at any point of its travel in the circle. This includes the base of the hour hand, it cannot rub against the hole in the clock face itself. As its only a friction fit, it can be turned to point to whatever hour it is, just with the fingers.

Installing the minute hand

The minute hand installation is done by putting the square hole in the hand, on the square post of the hand shaft. The bottom of the minute hand cannot be rubbing the hour hand tube or the hour hand. If it is, the hour hand has to be set lower on its tube. With the minute hand on its square post now its time to put the hand nut on. The nut goes on finger tight and then a little bit more with needle nose pliers to make it secure.

Mechanical Clock Hands

The German mechanical clock hands are sold by the time track diameter. When ordering these mechanical clock hands, this measurement is important. To clarify, the dial diameter is the measurement of the time track. This means from just outside the 9 straight across to just outside the 3. For example, if this time track diameter is 6 inches, then select hands for a 6 inch time track in the drop down list. Hands for a 6 inch time track will have a minute hand of about 2 7/8 long from the mounting hole to the end. The proportionally smaller hour hand will come with the minute hand. This is a vastly different way of measuring than the quartz clock hands. So be sure to follow these directions for measuring and not the ones for the quartz hands.

Ordering Hands

After getting the time track diameter measurement, it is time to choose a style for the mechanical clock hand. Under each style of hand, there is a drop down menu. Look to see if the style comes in the size needed for the clock. Not all styles of hands come in the same sizes, so might have to look at the different options available. The most popular styles of mechanical clock hands are the serpentine and spade hands. Remember, the minute hand will come a little less than half of this time track measurement. The hour hand will be proportional in size to the minute hand.

How they are sent

So, when ordering mechanical clock hands, remember that they come as a pair, hour and minute hand. They ship the next business day from Clockworks in Huntington MA USA, via the method is chosen upon checkout.

The content of this website is copyright by Clockworks and written by James Stoudenmire in year 2020

Mechanical Clock Chime On Time

These are the directions to get a German mechanical clock to chime on time. This means having the clock hands point to the right spot when the clock chimes. When replacing a clock movement, or getting new clock hands, either one, you will notice it will chime 5 minutes before it is supposed to, or 10 min after, something like this. This page explains how to correct this situation. It is unbelievably fast and easy to do.

Working with the minute hand

After a new mechanical movement is installed, or if you are just installing a new set of hands, it maybe noticed the clock will not chime at the time it's supposed to. To correct this, take the minute hand off of the clock. This is the longer of the two hands. With this minute hand off of the clock, turn it upside down and look that it has a square hole where it attaches to the clock. This square hole is in a bushing that will rotate WITHIN the minute hand itself.

The correction

So, all to be done is just use needle nose pliers to turn this bushing ever so slightly. Put the hand back on the clock and see if it’s pointing to the correct place where it chimed. If it is, then it all set and it will point to the exact place it is supposed too. If it is still not right, take the hand off and try again. Once you get the minute hand to point where it just chimed you then set to the correct time.

The conclusion

It is really that easy, there is nothing to do with the clock itself, only the minute hand. In other words, to put it in a silly way, take the minute hand off of the clock and walk to the garage with it. Take it far, far away from the clock. When in your garage take needle nose pliers and turn the bushing within the hand itself. Then walk back to the clock and put it on. See if it's now pointing to the right spot.

The content of this website is copyright by Clockworks and written by James Stoudenmire in year 2020

Mechanical clock hand nuts

One of the most common parts a Mechanical clock needs is the hand nut. As previously stated, the older the clock the harder things are to find. The hand nuts Clockworks offer are for movements made after the 1930's.

Prior to 1930 clock hand nuts

There were not many standards on what the hand nut size should be on the early clocks. However, prior to around 1930 there is no telling what will work. In other words, it is literally trial and error. There was no standard hand nut size. Any hand nut we offer, may, or may not, work. This includes cuckoo hand nuts, American clock hand nuts, or German hand nuts. However, with even all of these assortments, there is a chance none of them will work on the clock.

Post 1930 clock hand nuts

Generally speaking, what we have to offer in the three types of clock hand nuts will cover most of the post 1930 Mechanical clocks. The cuckoo hand nuts fit about 80% of the post war German made cuckoo clocks. The American clock hand nuts fit many of the mechanical time strikes that were so popular. German hand nuts fit most post war German made mechanical clocks, with the exception being a few large grandfather clocks.

Clocks that do not take a hand nut

Not all clocks require a hand nut. Some antique mechanical clocks require a clock hand washer and a tapered pin instead. These secure the minute hand as an alternative to the hand nut. The washer may have a small square hole, or large, oblong or round hole. Clockworks offers an assortment of 100 clock hand washers that includes all the styles mentioned. A tapered pin is used to secure the hand with the washer on top of it. The taper pin is inserted into a hole in the end of the minute hand arbor to secure the washer and minute hand to the clock. A taper pin is a small brass or steel rod that is wide on one end and skinny on the other. Clockworks offers them in an assortment of 100 to ensure the right one is there.

The content of this website is copyright by Clockworks and written by James Stoudenmire in year 2020
Clock Hand Measurement

Serpentine Mechanical Clock Hands

This is a set of Serpentine Mechanical Clock Hands that fit most German mechanical clock movements made after 1950. The hands are measured by the time track diameter. A time track is the small ring outside of the numerals and the minute hand length will be about half this diameter. The hour hand is included and of course shorter. The minute hand has a 2.2mm square mounting hole, the hour hand has a 4.5mm round hole.

↑ Back to top

Mechanical Clock Spade Hands

Posted on    Posted in  turned_in_not  
Mechanical Clock Hands are the arms that point to the numbers 1 to 12 so you know what time of day it is. Clock hands come in a variety of lengths.
Mechanical Clock HandsHand RemovalHand InstallationOrdering Mech HandsChime On Time FixAbout Hand Nuts

Please view these information tabs to help with getting the Mechanical Clock Hands.

Removing Mechanical Clock Hands

Removing Mechanical Clock Hands is fast and easy to do. The following are hand removal instructions for German mechanical movements post WW2.

German Post WW2 wall, mantle and floor models

Removing mechanical clock hands for post WW2, mantle and floor clocks is quite simple. Turn the hand nut to the left while holding the minute hand with fingers. Use some small needle nose pliers to loosen the nut first. Once the nut is loose, turn it with fingers until it comes off. Then the minute hand will be able to wiggle straight off its square arbor and off of the clock. The hour hand is a friction fit, so just twist the hour hand back and forth and pull toward you until it comes off. If having a second hand bit, that is only a friction also, so just grab it with fingernails, twist pull off.

American Antique time and strike

These type of movements come in two styles. If there is a minute hand nut, the first style is the same as above. Be very careful not to lose this hand nut. They are very hard to find and replace. The second style of mechanical clock hands will have a pin holding the minute hand on instead of a nut. This pin tapers, meaning it's fat on one side and skinny on the other. Just grab the fat side with needle nose pliers and yank the pin out. The minute hand will fall out with a washer. Save the washer and the tapered pin for ease of reinstalling the hands. If these items happen to get lost, Clockworks offers washers and taper pins for purchase, as well as replacement mechanical clock hands.

The content of this website is copyright by Clockworks and written by James Stoudenmire in year 2020

German Mechanical Clock Hand Installation

The installation of the clock hands on a German mechanical movement is reverse of removal. If either the movement was replaced, or the hands are new, the minute hand must be adjusted. This is so it will point to the correct time when it chimes.

Installing the hour hand

First comes the hour hand as a friction fit. Put the hand on its round post and twist and push toward the front front of the dial. Be sure it is not in contact with the dial at any point of its travel in the circle. This includes the base of the hour hand, it cannot rub against the hole in the clock face itself. As its only a friction fit, it can be turned to point to whatever hour it is, just with the fingers.

Installing the minute hand

The minute hand installation is done by putting the square hole in the hand, on the square post of the hand shaft. The bottom of the minute hand cannot be rubbing the hour hand tube or the hour hand. If it is, the hour hand has to be set lower on its tube. With the minute hand on its square post now its time to put the hand nut on. The nut goes on finger tight and then a little bit more with needle nose pliers to make it secure.

Mechanical Clock Hands

The German mechanical clock hands are sold by the time track diameter. When ordering these mechanical clock hands, this measurement is important. To clarify, the dial diameter is the measurement of the time track. This means from just outside the 9 straight across to just outside the 3. For example, if this time track diameter is 6 inches, then select hands for a 6 inch time track in the drop down list. Hands for a 6 inch time track will have a minute hand of about 2 7/8 long from the mounting hole to the end. The proportionally smaller hour hand will come with the minute hand. This is a vastly different way of measuring than the quartz clock hands. So be sure to follow these directions for measuring and not the ones for the quartz hands.

Ordering Hands

After getting the time track diameter measurement, it is time to choose a style for the mechanical clock hand. Under each style of hand, there is a drop down menu. Look to see if the style comes in the size needed for the clock. Not all styles of hands come in the same sizes, so might have to look at the different options available. The most popular styles of mechanical clock hands are the serpentine and spade hands. Remember, the minute hand will come a little less than half of this time track measurement. The hour hand will be proportional in size to the minute hand.

How they are sent

So, when ordering mechanical clock hands, remember that they come as a pair, hour and minute hand. They ship the next business day from Clockworks in Huntington MA USA, via the method is chosen upon checkout.

The content of this website is copyright by Clockworks and written by James Stoudenmire in year 2020

Mechanical Clock Chime On Time

These are the directions to get a German mechanical clock to chime on time. This means having the clock hands point to the right spot when the clock chimes. When replacing a clock movement, or getting new clock hands, either one, you will notice it will chime 5 minutes before it is supposed to, or 10 min after, something like this. This page explains how to correct this situation. It is unbelievably fast and easy to do.

Working with the minute hand

After a new mechanical movement is installed, or if you are just installing a new set of hands, it maybe noticed the clock will not chime at the time it's supposed to. To correct this, take the minute hand off of the clock. This is the longer of the two hands. With this minute hand off of the clock, turn it upside down and look that it has a square hole where it attaches to the clock. This square hole is in a bushing that will rotate WITHIN the minute hand itself.

The correction

So, all to be done is just use needle nose pliers to turn this bushing ever so slightly. Put the hand back on the clock and see if it’s pointing to the correct place where it chimed. If it is, then it all set and it will point to the exact place it is supposed too. If it is still not right, take the hand off and try again. Once you get the minute hand to point where it just chimed you then set to the correct time.

The conclusion

It is really that easy, there is nothing to do with the clock itself, only the minute hand. In other words, to put it in a silly way, take the minute hand off of the clock and walk to the garage with it. Take it far, far away from the clock. When in your garage take needle nose pliers and turn the bushing within the hand itself. Then walk back to the clock and put it on. See if it's now pointing to the right spot.

The content of this website is copyright by Clockworks and written by James Stoudenmire in year 2020

Mechanical clock hand nuts

One of the most common parts a Mechanical clock needs is the hand nut. As previously stated, the older the clock the harder things are to find. The hand nuts Clockworks offer are for movements made after the 1930's.

Prior to 1930 clock hand nuts

There were not many standards on what the hand nut size should be on the early clocks. However, prior to around 1930 there is no telling what will work. In other words, it is literally trial and error. There was no standard hand nut size. Any hand nut we offer, may, or may not, work. This includes cuckoo hand nuts, American clock hand nuts, or German hand nuts. However, with even all of these assortments, there is a chance none of them will work on the clock.

Post 1930 clock hand nuts

Generally speaking, what we have to offer in the three types of clock hand nuts will cover most of the post 1930 Mechanical clocks. The cuckoo hand nuts fit about 80% of the post war German made cuckoo clocks. The American clock hand nuts fit many of the mechanical time strikes that were so popular. German hand nuts fit most post war German made mechanical clocks, with the exception being a few large grandfather clocks.

Clocks that do not take a hand nut

Not all clocks require a hand nut. Some antique mechanical clocks require a clock hand washer and a tapered pin instead. These secure the minute hand as an alternative to the hand nut. The washer may have a small square hole, or large, oblong or round hole. Clockworks offers an assortment of 100 clock hand washers that includes all the styles mentioned. A tapered pin is used to secure the hand with the washer on top of it. The taper pin is inserted into a hole in the end of the minute hand arbor to secure the washer and minute hand to the clock. A taper pin is a small brass or steel rod that is wide on one end and skinny on the other. Clockworks offers them in an assortment of 100 to ensure the right one is there.

The content of this website is copyright by Clockworks and written by James Stoudenmire in year 2020
Clock Hand Measurement

Mechanical Clock Spade Hands

Spade hands that fit most German mechanical clock movements made after 1950. This includes Hermle, Urgos, Kieninger movements and more. The hands are measured by the time track diameter. A time track is the small ring outside of the numerals and the minute hand length will be about half this diameter. The hour hand is included and of course shorter. The minute hand has a 2.2mm square mounting hole, the hour hand has a 4.5mm round hole.


↑ Back to top

Design Quartz Clock Hands #H7

Posted on    Posted in  turned_in_not  

Design quartz clock hands

Design quartz clock hands for the Clockworks battery operated movements. These will fit all the battery movements sold by Clockworks. The minute hand has an oblong mounting hole and the hour hand has a round one.

measuring the minute hand is done from the mounting hole to the end. The hour hand will just come shorter proportionately and comes with the minute hand.


Battery Quartz Clock Hands - Quartz clock hands in black and gold. Please choose the length by the minute hand only. - Clockworks
About Quartz Clock HandsDescriptionCompatibility CheckMeasuring and OrderingMounting
How to measure the minute hand

Sold as a pair with both hour and minute hands. Styles vary depending on length.

Quartz Clock Hands

Quartz Clock Hands that will fit any battery movement we offer. There are two types of quartz hands in the world. One is China standard and one is American standard. The China way of using the hands is with round holes in both the hour and minute hands. Comparatively, the American style has an oblong mounting hole in the minute hand and a round hole for the hour hand that fits what is known as an "I" shaft. All of the hands offered here fit "I" shaft movements only. In other words all of them will fit the quartz movements that we sell.

Quartz clock hand compatibility

When replacing a quartz clock movement, the old hands may fit the new movement just fine. If there is an oblong hole in the minute hand, chances are good that it will fit. The hour hand will fit the new quartz movement either way. To clarify, it is the minute hand (the longer of the two hands) that is a concern. In any event, if in doubt, it is best to order new hands for the new movement upon checking out. This way it will be all set and will have everything needed for a smooth movement swap out.

Measuring and Ordering New Hands

Quartz clock hands come together as a set, and only the minute hand is measured when replacing them. Measure it, the long hand, from the mounting hole to the tip. The shorter hand, the hour hand, comes with the minute hand and is proportionally smaller. For larger dials, more than 10 inches wide, see our High Torque movement and Hands section. As for Second hands, they will fit the high torque clock movements, however they do not come in long lengths like the minute hands do.

Mounting Quartz Clock Hands

Mounting quartz clock hands is easy. First put on the hour hand, with it’s round hole. As a friction fit, just push it on. The minute hand, with it’s oblong mounting hole, and goes on next. Fit it onto the “I” on the top of the shaft. To tighten the hands use the nut with a hole if using a second hand. Use the cap nut if not using a second hand.

↑ Back to top

Spade Clock Hands American

Posted on    Posted in  turned_in_not  
Mechanical Clock Hands are the arms that point to the numbers 1 to 12 so you know what time of day it is. Clock hands come in a variety of lengths.
Mechanical Clock HandsHand RemovalHand InstallationOrdering Mech HandsChime On Time FixAbout Hand Nuts

Please view these information tabs to help with getting the Mechanical Clock Hands.

Removing Mechanical Clock Hands

Removing Mechanical Clock Hands is fast and easy to do. The following are hand removal instructions for German mechanical movements post WW2.

German Post WW2 wall, mantle and floor models

Removing mechanical clock hands for post WW2, mantle and floor clocks is quite simple. Turn the hand nut to the left while holding the minute hand with fingers. Use some small needle nose pliers to loosen the nut first. Once the nut is loose, turn it with fingers until it comes off. Then the minute hand will be able to wiggle straight off its square arbor and off of the clock. The hour hand is a friction fit, so just twist the hour hand back and forth and pull toward you until it comes off. If having a second hand bit, that is only a friction also, so just grab it with fingernails, twist pull off.

American Antique time and strike

These type of movements come in two styles. If there is a minute hand nut, the first style is the same as above. Be very careful not to lose this hand nut. They are very hard to find and replace. The second style of mechanical clock hands will have a pin holding the minute hand on instead of a nut. This pin tapers, meaning it's fat on one side and skinny on the other. Just grab the fat side with needle nose pliers and yank the pin out. The minute hand will fall out with a washer. Save the washer and the tapered pin for ease of reinstalling the hands. If these items happen to get lost, Clockworks offers washers and taper pins for purchase, as well as replacement mechanical clock hands.

The content of this website is copyright by Clockworks and written by James Stoudenmire in year 2020

German Mechanical Clock Hand Installation

The installation of the clock hands on a German mechanical movement is reverse of removal. If either the movement was replaced, or the hands are new, the minute hand must be adjusted. This is so it will point to the correct time when it chimes.

Installing the hour hand

First comes the hour hand as a friction fit. Put the hand on its round post and twist and push toward the front front of the dial. Be sure it is not in contact with the dial at any point of its travel in the circle. This includes the base of the hour hand, it cannot rub against the hole in the clock face itself. As its only a friction fit, it can be turned to point to whatever hour it is, just with the fingers.

Installing the minute hand

The minute hand installation is done by putting the square hole in the hand, on the square post of the hand shaft. The bottom of the minute hand cannot be rubbing the hour hand tube or the hour hand. If it is, the hour hand has to be set lower on its tube. With the minute hand on its square post now its time to put the hand nut on. The nut goes on finger tight and then a little bit more with needle nose pliers to make it secure.

Mechanical Clock Hands

The German mechanical clock hands are sold by the time track diameter. When ordering these mechanical clock hands, this measurement is important. To clarify, the dial diameter is the measurement of the time track. This means from just outside the 9 straight across to just outside the 3. For example, if this time track diameter is 6 inches, then select hands for a 6 inch time track in the drop down list. Hands for a 6 inch time track will have a minute hand of about 2 7/8 long from the mounting hole to the end. The proportionally smaller hour hand will come with the minute hand. This is a vastly different way of measuring than the quartz clock hands. So be sure to follow these directions for measuring and not the ones for the quartz hands.

Ordering Hands

After getting the time track diameter measurement, it is time to choose a style for the mechanical clock hand. Under each style of hand, there is a drop down menu. Look to see if the style comes in the size needed for the clock. Not all styles of hands come in the same sizes, so might have to look at the different options available. The most popular styles of mechanical clock hands are the serpentine and spade hands. Remember, the minute hand will come a little less than half of this time track measurement. The hour hand will be proportional in size to the minute hand.

How they are sent

So, when ordering mechanical clock hands, remember that they come as a pair, hour and minute hand. They ship the next business day from Clockworks in Huntington MA USA, via the method is chosen upon checkout.

The content of this website is copyright by Clockworks and written by James Stoudenmire in year 2020

Mechanical Clock Chime On Time

These are the directions to get a German mechanical clock to chime on time. This means having the clock hands point to the right spot when the clock chimes. When replacing a clock movement, or getting new clock hands, either one, you will notice it will chime 5 minutes before it is supposed to, or 10 min after, something like this. This page explains how to correct this situation. It is unbelievably fast and easy to do.

Working with the minute hand

After a new mechanical movement is installed, or if you are just installing a new set of hands, it maybe noticed the clock will not chime at the time it's supposed to. To correct this, take the minute hand off of the clock. This is the longer of the two hands. With this minute hand off of the clock, turn it upside down and look that it has a square hole where it attaches to the clock. This square hole is in a bushing that will rotate WITHIN the minute hand itself.

The correction

So, all to be done is just use needle nose pliers to turn this bushing ever so slightly. Put the hand back on the clock and see if it’s pointing to the correct place where it chimed. If it is, then it all set and it will point to the exact place it is supposed too. If it is still not right, take the hand off and try again. Once you get the minute hand to point where it just chimed you then set to the correct time.

The conclusion

It is really that easy, there is nothing to do with the clock itself, only the minute hand. In other words, to put it in a silly way, take the minute hand off of the clock and walk to the garage with it. Take it far, far away from the clock. When in your garage take needle nose pliers and turn the bushing within the hand itself. Then walk back to the clock and put it on. See if it's now pointing to the right spot.

The content of this website is copyright by Clockworks and written by James Stoudenmire in year 2020

Mechanical clock hand nuts

One of the most common parts a Mechanical clock needs is the hand nut. As previously stated, the older the clock the harder things are to find. The hand nuts Clockworks offer are for movements made after the 1930's.

Prior to 1930 clock hand nuts

There were not many standards on what the hand nut size should be on the early clocks. However, prior to around 1930 there is no telling what will work. In other words, it is literally trial and error. There was no standard hand nut size. Any hand nut we offer, may, or may not, work. This includes cuckoo hand nuts, American clock hand nuts, or German hand nuts. However, with even all of these assortments, there is a chance none of them will work on the clock.

Post 1930 clock hand nuts

Generally speaking, what we have to offer in the three types of clock hand nuts will cover most of the post 1930 Mechanical clocks. The cuckoo hand nuts fit about 80% of the post war German made cuckoo clocks. The American clock hand nuts fit many of the mechanical time strikes that were so popular. German hand nuts fit most post war German made mechanical clocks, with the exception being a few large grandfather clocks.

Clocks that do not take a hand nut

Not all clocks require a hand nut. Some antique mechanical clocks require a clock hand washer and a tapered pin instead. These secure the minute hand as an alternative to the hand nut. The washer may have a small square hole, or large, oblong or round hole. Clockworks offers an assortment of 100 clock hand washers that includes all the styles mentioned. A tapered pin is used to secure the hand with the washer on top of it. The taper pin is inserted into a hole in the end of the minute hand arbor to secure the washer and minute hand to the clock. A taper pin is a small brass or steel rod that is wide on one end and skinny on the other. Clockworks offers them in an assortment of 100 to ensure the right one is there.

The content of this website is copyright by Clockworks and written by James Stoudenmire in year 2020
Clock Hand Measurement

Spade Clock Hands American

Spade hands for antique 8 day time strike units made in America. For American antique movements such as ST, Sessions, New Haven, Ansonia, Gilbert, and Waterbury. Available with a square hole or a oblong hole for the mounting hole in the minute hand. The hour hand comes with the minute hand and has a round mounting hole with a brass sleeve. It of course will be shorter than the minute hand and these hands are sold as a pair.

Fits many but not all

These are not a guaranteed fit, it usually solves the problem. The older the clock movement the more non standard things were in the clock movement making industry. This is to say these hands are the best shot at getting hands for the clock. This holds most true for movements produced in USA in the first 50 years of the 1900s.

↑ Back to top

Serpentine High-Torque Clock Hands #HTH8

Posted on    Posted in  turned_in_not  

Serpentine High-Torque Clock Hands

Serpentine High-Torque Clock Hands for the standard "I" shaft battery clock movements. The hour hand will have a round hole and is installed with a push and twist by friction only. The minute hand will have an oblong hole. The oblong hole just fits over the movements "I" post and is secured with a mounting nut.

Quartz clock hands are measured by the minute hand only, from the mounting hole to the end. The hour hand comes with the pair, but only measuring the minute hand. The hour hand will just come shorter proportionately.


About High-Torque clock hands

High-Torque clock hands are any minute hand over 5 inches. Of course, they need a strong battery movement known as High Torque. To get the correct size, measure the minute hand only, from the center of the mounting hole to the tip. Will receive one set of hands, minute and hour, from that one measurement. The hands we sell are known as the USA standard “I” shaft type, meaning that the minute hand has a oblong hole and the hour hand has a round hole.

Styles vary depending on length

Longer clock hands have (and require) a counter weight on the back end of the minute hand. Consequently, they will look somewhat different than the shorter hands of the same style. This is the way they need to be in order to operate the small battery high-torque clock movement. Thus, if the counter weight was not there, the long high-torque clock hands would not be able to climb uphill to the top of the hour.

Mounting Method

Quartz Clock Hands we offer fit on any battery movement we offer. In essence, there are two types of battery clock hands in the world. One is the China standard and one is American standard. The China standard has round holes in both the hour and minute hands. American standard has an oblong hole in the minute hand and a round hole in the hour hand, thus fitting the American "I" shaft. All of the hands offered here fit "I" shaft movements, therefore we sell only "I" shaft quartz movements.

Quartz clock hand compatibility

When replacing a high torque movement, and talking about High-Torque clock hands, be aware the old hands may fit the new movement just fine. If there is an oblong hole in the minute hand, chances are it will fit. The hour hand will always fit the new quartz movement.Only the minute hand (the longer of the two hands) is a concern. If in doubt, it's best to just order new hands for the new movement upon checking out. The order would now be complete for a smooth movement swap out.

How the hands are sold

When talking about High-Torque Clock Hands, it is a set of hands, however only measure the minute hand when replacing the set.Measure the long hand from the mounting hole to the tip. The short hand, which is the hour hand, comes in the set with the minute hand. It is proportionally smaller. See our High Torque movement and hands section. A Second hand will fit any of our movements, including the high torque clock movements. However, second hands do not come in very long lengths.

Mounting quartz clock hands

Mounting the high-torque clock hands is easy. First, put the hour hand on as a friction fit. Just twist and push it on. Second, install the minute hand, with the oblong mounting hole. Push it onto the "I" shaft, at the tip of the hand shaft, and screw on the nut. Finally, if wanting a second hand, use the nut with a hole in it. If no second hand is being used, use the cap style nut so it looks pretty.

About High-Torque clock hands

↑ Back to top

Maltese Clock Hands American

Posted on    Posted in  turned_in_not  
Mechanical Clock Hands are the arms that point to the numbers 1 to 12 so you know what time of day it is. Clock hands come in a variety of lengths.
Mechanical Clock HandsHand RemovalHand InstallationOrdering Mech HandsChime On Time FixAbout Hand Nuts

Please view these information tabs to help with getting the Mechanical Clock Hands.

Removing Mechanical Clock Hands

Removing Mechanical Clock Hands is fast and easy to do. The following are hand removal instructions for German mechanical movements post WW2.

German Post WW2 wall, mantle and floor models

Removing mechanical clock hands for post WW2, mantle and floor clocks is quite simple. Turn the hand nut to the left while holding the minute hand with fingers. Use some small needle nose pliers to loosen the nut first. Once the nut is loose, turn it with fingers until it comes off. Then the minute hand will be able to wiggle straight off its square arbor and off of the clock. The hour hand is a friction fit, so just twist the hour hand back and forth and pull toward you until it comes off. If having a second hand bit, that is only a friction also, so just grab it with fingernails, twist pull off.

American Antique time and strike

These type of movements come in two styles. If there is a minute hand nut, the first style is the same as above. Be very careful not to lose this hand nut. They are very hard to find and replace. The second style of mechanical clock hands will have a pin holding the minute hand on instead of a nut. This pin tapers, meaning it's fat on one side and skinny on the other. Just grab the fat side with needle nose pliers and yank the pin out. The minute hand will fall out with a washer. Save the washer and the tapered pin for ease of reinstalling the hands. If these items happen to get lost, Clockworks offers washers and taper pins for purchase, as well as replacement mechanical clock hands.

The content of this website is copyright by Clockworks and written by James Stoudenmire in year 2020

German Mechanical Clock Hand Installation

The installation of the clock hands on a German mechanical movement is reverse of removal. If either the movement was replaced, or the hands are new, the minute hand must be adjusted. This is so it will point to the correct time when it chimes.

Installing the hour hand

First comes the hour hand as a friction fit. Put the hand on its round post and twist and push toward the front front of the dial. Be sure it is not in contact with the dial at any point of its travel in the circle. This includes the base of the hour hand, it cannot rub against the hole in the clock face itself. As its only a friction fit, it can be turned to point to whatever hour it is, just with the fingers.

Installing the minute hand

The minute hand installation is done by putting the square hole in the hand, on the square post of the hand shaft. The bottom of the minute hand cannot be rubbing the hour hand tube or the hour hand. If it is, the hour hand has to be set lower on its tube. With the minute hand on its square post now its time to put the hand nut on. The nut goes on finger tight and then a little bit more with needle nose pliers to make it secure.

Mechanical Clock Hands

The German mechanical clock hands are sold by the time track diameter. When ordering these mechanical clock hands, this measurement is important. To clarify, the dial diameter is the measurement of the time track. This means from just outside the 9 straight across to just outside the 3. For example, if this time track diameter is 6 inches, then select hands for a 6 inch time track in the drop down list. Hands for a 6 inch time track will have a minute hand of about 2 7/8 long from the mounting hole to the end. The proportionally smaller hour hand will come with the minute hand. This is a vastly different way of measuring than the quartz clock hands. So be sure to follow these directions for measuring and not the ones for the quartz hands.

Ordering Hands

After getting the time track diameter measurement, it is time to choose a style for the mechanical clock hand. Under each style of hand, there is a drop down menu. Look to see if the style comes in the size needed for the clock. Not all styles of hands come in the same sizes, so might have to look at the different options available. The most popular styles of mechanical clock hands are the serpentine and spade hands. Remember, the minute hand will come a little less than half of this time track measurement. The hour hand will be proportional in size to the minute hand.

How they are sent

So, when ordering mechanical clock hands, remember that they come as a pair, hour and minute hand. They ship the next business day from Clockworks in Huntington MA USA, via the method is chosen upon checkout.

The content of this website is copyright by Clockworks and written by James Stoudenmire in year 2020

Mechanical Clock Chime On Time

These are the directions to get a German mechanical clock to chime on time. This means having the clock hands point to the right spot when the clock chimes. When replacing a clock movement, or getting new clock hands, either one, you will notice it will chime 5 minutes before it is supposed to, or 10 min after, something like this. This page explains how to correct this situation. It is unbelievably fast and easy to do.

Working with the minute hand

After a new mechanical movement is installed, or if you are just installing a new set of hands, it maybe noticed the clock will not chime at the time it's supposed to. To correct this, take the minute hand off of the clock. This is the longer of the two hands. With this minute hand off of the clock, turn it upside down and look that it has a square hole where it attaches to the clock. This square hole is in a bushing that will rotate WITHIN the minute hand itself.

The correction

So, all to be done is just use needle nose pliers to turn this bushing ever so slightly. Put the hand back on the clock and see if it’s pointing to the correct place where it chimed. If it is, then it all set and it will point to the exact place it is supposed too. If it is still not right, take the hand off and try again. Once you get the minute hand to point where it just chimed you then set to the correct time.

The conclusion

It is really that easy, there is nothing to do with the clock itself, only the minute hand. In other words, to put it in a silly way, take the minute hand off of the clock and walk to the garage with it. Take it far, far away from the clock. When in your garage take needle nose pliers and turn the bushing within the hand itself. Then walk back to the clock and put it on. See if it's now pointing to the right spot.

The content of this website is copyright by Clockworks and written by James Stoudenmire in year 2020

Mechanical clock hand nuts

One of the most common parts a Mechanical clock needs is the hand nut. As previously stated, the older the clock the harder things are to find. The hand nuts Clockworks offer are for movements made after the 1930's.

Prior to 1930 clock hand nuts

There were not many standards on what the hand nut size should be on the early clocks. However, prior to around 1930 there is no telling what will work. In other words, it is literally trial and error. There was no standard hand nut size. Any hand nut we offer, may, or may not, work. This includes cuckoo hand nuts, American clock hand nuts, or German hand nuts. However, with even all of these assortments, there is a chance none of them will work on the clock.

Post 1930 clock hand nuts

Generally speaking, what we have to offer in the three types of clock hand nuts will cover most of the post 1930 Mechanical clocks. The cuckoo hand nuts fit about 80% of the post war German made cuckoo clocks. The American clock hand nuts fit many of the mechanical time strikes that were so popular. German hand nuts fit most post war German made mechanical clocks, with the exception being a few large grandfather clocks.

Clocks that do not take a hand nut

Not all clocks require a hand nut. Some antique mechanical clocks require a clock hand washer and a tapered pin instead. These secure the minute hand as an alternative to the hand nut. The washer may have a small square hole, or large, oblong or round hole. Clockworks offers an assortment of 100 clock hand washers that includes all the styles mentioned. A tapered pin is used to secure the hand with the washer on top of it. The taper pin is inserted into a hole in the end of the minute hand arbor to secure the washer and minute hand to the clock. A taper pin is a small brass or steel rod that is wide on one end and skinny on the other. Clockworks offers them in an assortment of 100 to ensure the right one is there.

The content of this website is copyright by Clockworks and written by James Stoudenmire in year 2020
Clock Hand Measurement

Maltese Clock Hands for American

For American antique movements such as ST, Sessions, New Haven, Ansonia, Gilbert, and Waterbury offering Maltese hands. Available with a square hole or a oblong hole for the mounting hole in the minute hand. The hour hand comes with the minute hand and has a round mounting hole with a brass sleeve. It of course will be shorter than the minute hand and these hands are sold as a pair.

Fits many but not all

These are not a guaranteed fit, it usually solves the problem. The older the clock movement the more non standard things were in the clock movement making industry. This is to say these hands are the best shot at getting hands for the clock. This holds most true for movements produced in USA in the first 50 years of the 1900s.


↑ Back to top

Grandfather Clock Second Hand

Posted on    Posted in  turned_in_not  
Mechanical Clock Hands are the arms that point to the numbers 1 to 12 so you know what time of day it is. Clock hands come in a variety of lengths.
Mechanical Clock HandsHand RemovalHand InstallationOrdering Mech HandsChime On Time FixAbout Hand Nuts

Please view these information tabs to help with getting the Mechanical Clock Hands.

Removing Mechanical Clock Hands

Removing Mechanical Clock Hands is fast and easy to do. The following are hand removal instructions for German mechanical movements post WW2.

German Post WW2 wall, mantle and floor models

Removing mechanical clock hands for post WW2, mantle and floor clocks is quite simple. Turn the hand nut to the left while holding the minute hand with fingers. Use some small needle nose pliers to loosen the nut first. Once the nut is loose, turn it with fingers until it comes off. Then the minute hand will be able to wiggle straight off its square arbor and off of the clock. The hour hand is a friction fit, so just twist the hour hand back and forth and pull toward you until it comes off. If having a second hand bit, that is only a friction also, so just grab it with fingernails, twist pull off.

American Antique time and strike

These type of movements come in two styles. If there is a minute hand nut, the first style is the same as above. Be very careful not to lose this hand nut. They are very hard to find and replace. The second style of mechanical clock hands will have a pin holding the minute hand on instead of a nut. This pin tapers, meaning it's fat on one side and skinny on the other. Just grab the fat side with needle nose pliers and yank the pin out. The minute hand will fall out with a washer. Save the washer and the tapered pin for ease of reinstalling the hands. If these items happen to get lost, Clockworks offers washers and taper pins for purchase, as well as replacement mechanical clock hands.

The content of this website is copyright by Clockworks and written by James Stoudenmire in year 2020

German Mechanical Clock Hand Installation

The installation of the clock hands on a German mechanical movement is reverse of removal. If either the movement was replaced, or the hands are new, the minute hand must be adjusted. This is so it will point to the correct time when it chimes.

Installing the hour hand

First comes the hour hand as a friction fit. Put the hand on its round post and twist and push toward the front front of the dial. Be sure it is not in contact with the dial at any point of its travel in the circle. This includes the base of the hour hand, it cannot rub against the hole in the clock face itself. As its only a friction fit, it can be turned to point to whatever hour it is, just with the fingers.

Installing the minute hand

The minute hand installation is done by putting the square hole in the hand, on the square post of the hand shaft. The bottom of the minute hand cannot be rubbing the hour hand tube or the hour hand. If it is, the hour hand has to be set lower on its tube. With the minute hand on its square post now its time to put the hand nut on. The nut goes on finger tight and then a little bit more with needle nose pliers to make it secure.

Mechanical Clock Hands

The German mechanical clock hands are sold by the time track diameter. When ordering these mechanical clock hands, this measurement is important. To clarify, the dial diameter is the measurement of the time track. This means from just outside the 9 straight across to just outside the 3. For example, if this time track diameter is 6 inches, then select hands for a 6 inch time track in the drop down list. Hands for a 6 inch time track will have a minute hand of about 2 7/8 long from the mounting hole to the end. The proportionally smaller hour hand will come with the minute hand. This is a vastly different way of measuring than the quartz clock hands. So be sure to follow these directions for measuring and not the ones for the quartz hands.

Ordering Hands

After getting the time track diameter measurement, it is time to choose a style for the mechanical clock hand. Under each style of hand, there is a drop down menu. Look to see if the style comes in the size needed for the clock. Not all styles of hands come in the same sizes, so might have to look at the different options available. The most popular styles of mechanical clock hands are the serpentine and spade hands. Remember, the minute hand will come a little less than half of this time track measurement. The hour hand will be proportional in size to the minute hand.

How they are sent

So, when ordering mechanical clock hands, remember that they come as a pair, hour and minute hand. They ship the next business day from Clockworks in Huntington MA USA, via the method is chosen upon checkout.

The content of this website is copyright by Clockworks and written by James Stoudenmire in year 2020

Mechanical Clock Chime On Time

These are the directions to get a German mechanical clock to chime on time. This means having the clock hands point to the right spot when the clock chimes. When replacing a clock movement, or getting new clock hands, either one, you will notice it will chime 5 minutes before it is supposed to, or 10 min after, something like this. This page explains how to correct this situation. It is unbelievably fast and easy to do.

Working with the minute hand

After a new mechanical movement is installed, or if you are just installing a new set of hands, it maybe noticed the clock will not chime at the time it's supposed to. To correct this, take the minute hand off of the clock. This is the longer of the two hands. With this minute hand off of the clock, turn it upside down and look that it has a square hole where it attaches to the clock. This square hole is in a bushing that will rotate WITHIN the minute hand itself.

The correction

So, all to be done is just use needle nose pliers to turn this bushing ever so slightly. Put the hand back on the clock and see if it’s pointing to the correct place where it chimed. If it is, then it all set and it will point to the exact place it is supposed too. If it is still not right, take the hand off and try again. Once you get the minute hand to point where it just chimed you then set to the correct time.

The conclusion

It is really that easy, there is nothing to do with the clock itself, only the minute hand. In other words, to put it in a silly way, take the minute hand off of the clock and walk to the garage with it. Take it far, far away from the clock. When in your garage take needle nose pliers and turn the bushing within the hand itself. Then walk back to the clock and put it on. See if it's now pointing to the right spot.

The content of this website is copyright by Clockworks and written by James Stoudenmire in year 2020

Mechanical clock hand nuts

One of the most common parts a Mechanical clock needs is the hand nut. As previously stated, the older the clock the harder things are to find. The hand nuts Clockworks offer are for movements made after the 1930's.

Prior to 1930 clock hand nuts

There were not many standards on what the hand nut size should be on the early clocks. However, prior to around 1930 there is no telling what will work. In other words, it is literally trial and error. There was no standard hand nut size. Any hand nut we offer, may, or may not, work. This includes cuckoo hand nuts, American clock hand nuts, or German hand nuts. However, with even all of these assortments, there is a chance none of them will work on the clock.

Post 1930 clock hand nuts

Generally speaking, what we have to offer in the three types of clock hand nuts will cover most of the post 1930 Mechanical clocks. The cuckoo hand nuts fit about 80% of the post war German made cuckoo clocks. The American clock hand nuts fit many of the mechanical time strikes that were so popular. German hand nuts fit most post war German made mechanical clocks, with the exception being a few large grandfather clocks.

Clocks that do not take a hand nut

Not all clocks require a hand nut. Some antique mechanical clocks require a clock hand washer and a tapered pin instead. These secure the minute hand as an alternative to the hand nut. The washer may have a small square hole, or large, oblong or round hole. Clockworks offers an assortment of 100 clock hand washers that includes all the styles mentioned. A tapered pin is used to secure the hand with the washer on top of it. The taper pin is inserted into a hole in the end of the minute hand arbor to secure the washer and minute hand to the clock. A taper pin is a small brass or steel rod that is wide on one end and skinny on the other. Clockworks offers them in an assortment of 100 to ensure the right one is there.

The content of this website is copyright by Clockworks and written by James Stoudenmire in year 2020
Clock Hand Measurement

Grandfather Clock Second Hand

Second hand sweep for a mechanical grandfather clock with the second hand option. Please choose the movement number that is on the back plate of the brass movement itself. This number is not on the paperwork or wood case, but the clockworks back plate instead. These will fit Post 1950 mechanical grandfather clock models of German origin. If the clock chimes quarterly and made after 1950 it will be a German movement. The case may or may not say Germany but there is a very good chance the movement is still German made.

Grandfather Clock Second Hand Installation

The second hand sweep is only a friction fit onto a spinning arbor that is on the front of the movement. This arbor is just above the hand shaft and below the number 12. It is often the same arbor the escape wheel is on, it has an extended post that sticks out the front side. It cannot be seen on the grandfather clock with the second hand removed but it is in there. To mount the second hand it only needs to be pushed onto this arbor. Hold with thumb and finger nails nice and straight into the second hand hole. Feel for the nub on the grandfather clock with the second hand post until it is found. Push the second hand on enough to keep it on the grandfather clock, but not so much the hand rubs the dial. If the second hand is scraping the dial as it spins around with the seconds, it may stop the clock.


↑ Back to top

Regulator Style Clock Hands

Posted on    Posted in  turned_in_not  
Mechanical Clock Hands are the arms that point to the numbers 1 to 12 so you know what time of day it is. Clock hands come in a variety of lengths.
Mechanical Clock HandsHand RemovalHand InstallationOrdering Mech HandsChime On Time FixAbout Hand Nuts

Please view these information tabs to help with getting the Mechanical Clock Hands.

Removing Mechanical Clock Hands

Removing Mechanical Clock Hands is fast and easy to do. The following are hand removal instructions for German mechanical movements post WW2.

German Post WW2 wall, mantle and floor models

Removing mechanical clock hands for post WW2, mantle and floor clocks is quite simple. Turn the hand nut to the left while holding the minute hand with fingers. Use some small needle nose pliers to loosen the nut first. Once the nut is loose, turn it with fingers until it comes off. Then the minute hand will be able to wiggle straight off its square arbor and off of the clock. The hour hand is a friction fit, so just twist the hour hand back and forth and pull toward you until it comes off. If having a second hand bit, that is only a friction also, so just grab it with fingernails, twist pull off.

American Antique time and strike

These type of movements come in two styles. If there is a minute hand nut, the first style is the same as above. Be very careful not to lose this hand nut. They are very hard to find and replace. The second style of mechanical clock hands will have a pin holding the minute hand on instead of a nut. This pin tapers, meaning it's fat on one side and skinny on the other. Just grab the fat side with needle nose pliers and yank the pin out. The minute hand will fall out with a washer. Save the washer and the tapered pin for ease of reinstalling the hands. If these items happen to get lost, Clockworks offers washers and taper pins for purchase, as well as replacement mechanical clock hands.

The content of this website is copyright by Clockworks and written by James Stoudenmire in year 2020

German Mechanical Clock Hand Installation

The installation of the clock hands on a German mechanical movement is reverse of removal. If either the movement was replaced, or the hands are new, the minute hand must be adjusted. This is so it will point to the correct time when it chimes.

Installing the hour hand

First comes the hour hand as a friction fit. Put the hand on its round post and twist and push toward the front front of the dial. Be sure it is not in contact with the dial at any point of its travel in the circle. This includes the base of the hour hand, it cannot rub against the hole in the clock face itself. As its only a friction fit, it can be turned to point to whatever hour it is, just with the fingers.

Installing the minute hand

The minute hand installation is done by putting the square hole in the hand, on the square post of the hand shaft. The bottom of the minute hand cannot be rubbing the hour hand tube or the hour hand. If it is, the hour hand has to be set lower on its tube. With the minute hand on its square post now its time to put the hand nut on. The nut goes on finger tight and then a little bit more with needle nose pliers to make it secure.

Mechanical Clock Hands

The German mechanical clock hands are sold by the time track diameter. When ordering these mechanical clock hands, this measurement is important. To clarify, the dial diameter is the measurement of the time track. This means from just outside the 9 straight across to just outside the 3. For example, if this time track diameter is 6 inches, then select hands for a 6 inch time track in the drop down list. Hands for a 6 inch time track will have a minute hand of about 2 7/8 long from the mounting hole to the end. The proportionally smaller hour hand will come with the minute hand. This is a vastly different way of measuring than the quartz clock hands. So be sure to follow these directions for measuring and not the ones for the quartz hands.

Ordering Hands

After getting the time track diameter measurement, it is time to choose a style for the mechanical clock hand. Under each style of hand, there is a drop down menu. Look to see if the style comes in the size needed for the clock. Not all styles of hands come in the same sizes, so might have to look at the different options available. The most popular styles of mechanical clock hands are the serpentine and spade hands. Remember, the minute hand will come a little less than half of this time track measurement. The hour hand will be proportional in size to the minute hand.

How they are sent

So, when ordering mechanical clock hands, remember that they come as a pair, hour and minute hand. They ship the next business day from Clockworks in Huntington MA USA, via the method is chosen upon checkout.

The content of this website is copyright by Clockworks and written by James Stoudenmire in year 2020

Mechanical Clock Chime On Time

These are the directions to get a German mechanical clock to chime on time. This means having the clock hands point to the right spot when the clock chimes. When replacing a clock movement, or getting new clock hands, either one, you will notice it will chime 5 minutes before it is supposed to, or 10 min after, something like this. This page explains how to correct this situation. It is unbelievably fast and easy to do.

Working with the minute hand

After a new mechanical movement is installed, or if you are just installing a new set of hands, it maybe noticed the clock will not chime at the time it's supposed to. To correct this, take the minute hand off of the clock. This is the longer of the two hands. With this minute hand off of the clock, turn it upside down and look that it has a square hole where it attaches to the clock. This square hole is in a bushing that will rotate WITHIN the minute hand itself.

The correction

So, all to be done is just use needle nose pliers to turn this bushing ever so slightly. Put the hand back on the clock and see if it’s pointing to the correct place where it chimed. If it is, then it all set and it will point to the exact place it is supposed too. If it is still not right, take the hand off and try again. Once you get the minute hand to point where it just chimed you then set to the correct time.

The conclusion

It is really that easy, there is nothing to do with the clock itself, only the minute hand. In other words, to put it in a silly way, take the minute hand off of the clock and walk to the garage with it. Take it far, far away from the clock. When in your garage take needle nose pliers and turn the bushing within the hand itself. Then walk back to the clock and put it on. See if it's now pointing to the right spot.

The content of this website is copyright by Clockworks and written by James Stoudenmire in year 2020

Mechanical clock hand nuts

One of the most common parts a Mechanical clock needs is the hand nut. As previously stated, the older the clock the harder things are to find. The hand nuts Clockworks offer are for movements made after the 1930's.

Prior to 1930 clock hand nuts

There were not many standards on what the hand nut size should be on the early clocks. However, prior to around 1930 there is no telling what will work. In other words, it is literally trial and error. There was no standard hand nut size. Any hand nut we offer, may, or may not, work. This includes cuckoo hand nuts, American clock hand nuts, or German hand nuts. However, with even all of these assortments, there is a chance none of them will work on the clock.

Post 1930 clock hand nuts

Generally speaking, what we have to offer in the three types of clock hand nuts will cover most of the post 1930 Mechanical clocks. The cuckoo hand nuts fit about 80% of the post war German made cuckoo clocks. The American clock hand nuts fit many of the mechanical time strikes that were so popular. German hand nuts fit most post war German made mechanical clocks, with the exception being a few large grandfather clocks.

Clocks that do not take a hand nut

Not all clocks require a hand nut. Some antique mechanical clocks require a clock hand washer and a tapered pin instead. These secure the minute hand as an alternative to the hand nut. The washer may have a small square hole, or large, oblong or round hole. Clockworks offers an assortment of 100 clock hand washers that includes all the styles mentioned. A tapered pin is used to secure the hand with the washer on top of it. The taper pin is inserted into a hole in the end of the minute hand arbor to secure the washer and minute hand to the clock. A taper pin is a small brass or steel rod that is wide on one end and skinny on the other. Clockworks offers them in an assortment of 100 to ensure the right one is there.

The content of this website is copyright by Clockworks and written by James Stoudenmire in year 2020
Clock Hand Measurement

Regulator Style Clock Hands

Here are Regulator Style Clock Hands that fit most German mechanical clock movements made after 1950. The hands are measured by the time track diameter. A time track is the small ring outside of the numerals and the minute hand length will be about half this diameter. The hour hand is included and of course shorter. The minute hand has a 2.2mm square mounting hole, the hour hand has a 4.5mm round hole.


↑ Back to top

Powerful Quartz Tower Clock Movement #HT3

Posted on    Posted in  turned_in_not  

Attn: The hands for these units will be offered during the checkout process upon hitting the add to cart button.

Tower clock movement for running the longest hands possible with a battery. Please note this unit is not weather proof, it would have to be in a weather proof clock case to be outside.

The MOST powerful tower clock movement is the strongest on the market before getting into the electrical units. They are geared special on the inside of the unit stronger as to take more weight if wanted. This one is stronger than any other High Torque quartz we offer and will also last longer with the very long hands.

The post that is being measured is as described on the above diagram. This is the threaded portion of the movement that goes through the dial face and needs to be long enough to mount the hex nut onto this post, in the front of the dial face. This means the movement is just mounted to the dial and nothing else, then you can put you're hour hand on, and then the minute hand with its nut. The white post that the hands go on is extended further than the regular high torque units to accommodate the special longer hands.

They have a threaded post diameter of 7/16 and a case dimension of 2-3/4'H x 2-3/16'W x 1'D

The long hands for these movements are sold separately


↑ Back to top

Pierced Spade Clock Hands

Posted on    Posted in  turned_in_not  
Mechanical Clock Hands are the arms that point to the numbers 1 to 12 so you know what time of day it is. Clock hands come in a variety of lengths.
Mechanical Clock HandsHand RemovalHand InstallationOrdering Mech HandsChime On Time FixAbout Hand Nuts

Please view these information tabs to help with getting the Mechanical Clock Hands.

Removing Mechanical Clock Hands

Removing Mechanical Clock Hands is fast and easy to do. The following are hand removal instructions for German mechanical movements post WW2.

German Post WW2 wall, mantle and floor models

Removing mechanical clock hands for post WW2, mantle and floor clocks is quite simple. Turn the hand nut to the left while holding the minute hand with fingers. Use some small needle nose pliers to loosen the nut first. Once the nut is loose, turn it with fingers until it comes off. Then the minute hand will be able to wiggle straight off its square arbor and off of the clock. The hour hand is a friction fit, so just twist the hour hand back and forth and pull toward you until it comes off. If having a second hand bit, that is only a friction also, so just grab it with fingernails, twist pull off.

American Antique time and strike

These type of movements come in two styles. If there is a minute hand nut, the first style is the same as above. Be very careful not to lose this hand nut. They are very hard to find and replace. The second style of mechanical clock hands will have a pin holding the minute hand on instead of a nut. This pin tapers, meaning it's fat on one side and skinny on the other. Just grab the fat side with needle nose pliers and yank the pin out. The minute hand will fall out with a washer. Save the washer and the tapered pin for ease of reinstalling the hands. If these items happen to get lost, Clockworks offers washers and taper pins for purchase, as well as replacement mechanical clock hands.

The content of this website is copyright by Clockworks and written by James Stoudenmire in year 2020

German Mechanical Clock Hand Installation

The installation of the clock hands on a German mechanical movement is reverse of removal. If either the movement was replaced, or the hands are new, the minute hand must be adjusted. This is so it will point to the correct time when it chimes.

Installing the hour hand

First comes the hour hand as a friction fit. Put the hand on its round post and twist and push toward the front front of the dial. Be sure it is not in contact with the dial at any point of its travel in the circle. This includes the base of the hour hand, it cannot rub against the hole in the clock face itself. As its only a friction fit, it can be turned to point to whatever hour it is, just with the fingers.

Installing the minute hand

The minute hand installation is done by putting the square hole in the hand, on the square post of the hand shaft. The bottom of the minute hand cannot be rubbing the hour hand tube or the hour hand. If it is, the hour hand has to be set lower on its tube. With the minute hand on its square post now its time to put the hand nut on. The nut goes on finger tight and then a little bit more with needle nose pliers to make it secure.

Mechanical Clock Hands

The German mechanical clock hands are sold by the time track diameter. When ordering these mechanical clock hands, this measurement is important. To clarify, the dial diameter is the measurement of the time track. This means from just outside the 9 straight across to just outside the 3. For example, if this time track diameter is 6 inches, then select hands for a 6 inch time track in the drop down list. Hands for a 6 inch time track will have a minute hand of about 2 7/8 long from the mounting hole to the end. The proportionally smaller hour hand will come with the minute hand. This is a vastly different way of measuring than the quartz clock hands. So be sure to follow these directions for measuring and not the ones for the quartz hands.

Ordering Hands

After getting the time track diameter measurement, it is time to choose a style for the mechanical clock hand. Under each style of hand, there is a drop down menu. Look to see if the style comes in the size needed for the clock. Not all styles of hands come in the same sizes, so might have to look at the different options available. The most popular styles of mechanical clock hands are the serpentine and spade hands. Remember, the minute hand will come a little less than half of this time track measurement. The hour hand will be proportional in size to the minute hand.

How they are sent

So, when ordering mechanical clock hands, remember that they come as a pair, hour and minute hand. They ship the next business day from Clockworks in Huntington MA USA, via the method is chosen upon checkout.

The content of this website is copyright by Clockworks and written by James Stoudenmire in year 2020

Mechanical Clock Chime On Time

These are the directions to get a German mechanical clock to chime on time. This means having the clock hands point to the right spot when the clock chimes. When replacing a clock movement, or getting new clock hands, either one, you will notice it will chime 5 minutes before it is supposed to, or 10 min after, something like this. This page explains how to correct this situation. It is unbelievably fast and easy to do.

Working with the minute hand

After a new mechanical movement is installed, or if you are just installing a new set of hands, it maybe noticed the clock will not chime at the time it's supposed to. To correct this, take the minute hand off of the clock. This is the longer of the two hands. With this minute hand off of the clock, turn it upside down and look that it has a square hole where it attaches to the clock. This square hole is in a bushing that will rotate WITHIN the minute hand itself.

The correction

So, all to be done is just use needle nose pliers to turn this bushing ever so slightly. Put the hand back on the clock and see if it’s pointing to the correct place where it chimed. If it is, then it all set and it will point to the exact place it is supposed too. If it is still not right, take the hand off and try again. Once you get the minute hand to point where it just chimed you then set to the correct time.

The conclusion

It is really that easy, there is nothing to do with the clock itself, only the minute hand. In other words, to put it in a silly way, take the minute hand off of the clock and walk to the garage with it. Take it far, far away from the clock. When in your garage take needle nose pliers and turn the bushing within the hand itself. Then walk back to the clock and put it on. See if it's now pointing to the right spot.

The content of this website is copyright by Clockworks and written by James Stoudenmire in year 2020

Mechanical clock hand nuts

One of the most common parts a Mechanical clock needs is the hand nut. As previously stated, the older the clock the harder things are to find. The hand nuts Clockworks offer are for movements made after the 1930's.

Prior to 1930 clock hand nuts

There were not many standards on what the hand nut size should be on the early clocks. However, prior to around 1930 there is no telling what will work. In other words, it is literally trial and error. There was no standard hand nut size. Any hand nut we offer, may, or may not, work. This includes cuckoo hand nuts, American clock hand nuts, or German hand nuts. However, with even all of these assortments, there is a chance none of them will work on the clock.

Post 1930 clock hand nuts

Generally speaking, what we have to offer in the three types of clock hand nuts will cover most of the post 1930 Mechanical clocks. The cuckoo hand nuts fit about 80% of the post war German made cuckoo clocks. The American clock hand nuts fit many of the mechanical time strikes that were so popular. German hand nuts fit most post war German made mechanical clocks, with the exception being a few large grandfather clocks.

Clocks that do not take a hand nut

Not all clocks require a hand nut. Some antique mechanical clocks require a clock hand washer and a tapered pin instead. These secure the minute hand as an alternative to the hand nut. The washer may have a small square hole, or large, oblong or round hole. Clockworks offers an assortment of 100 clock hand washers that includes all the styles mentioned. A tapered pin is used to secure the hand with the washer on top of it. The taper pin is inserted into a hole in the end of the minute hand arbor to secure the washer and minute hand to the clock. A taper pin is a small brass or steel rod that is wide on one end and skinny on the other. Clockworks offers them in an assortment of 100 to ensure the right one is there.

The content of this website is copyright by Clockworks and written by James Stoudenmire in year 2020
Clock Hand Measurement

Pierced Spade Clock Hands

Pierced spade hands for antique 8 day time strike units made in USA for a 5 inch time track. For American antique movements such as ST, Sessions, New Haven, Ansonia, Gilbert, and Waterbury. Available with a square hole or a oblong hole for the mounting hole in the minute hand. The hour hand comes with the minute hand and has a round mounting hole with a brass sleeve. It of course will be shorter than the minute hand and these hands are sold as a pair.

Fits many but not all

These are not a guaranteed fit, it usually solves the problem. The older the clock movement the more non standard things were in the clock movement making industry. This is to say these hands are the best shot at getting hands for the clock. This holds most true for movements produced in USA in the first 50 years of the 1900s.


↑ Back to top

Seth Thomas Clock Hands

Posted on    Posted in  turned_in_not  
Mechanical Clock Hands are the arms that point to the numbers 1 to 12 so you know what time of day it is. Clock hands come in a variety of lengths.
Mechanical Clock HandsHand RemovalHand InstallationOrdering Mech HandsChime On Time FixAbout Hand Nuts

Please view these information tabs to help with getting the Mechanical Clock Hands.

Removing Mechanical Clock Hands

Removing Mechanical Clock Hands is fast and easy to do. The following are hand removal instructions for German mechanical movements post WW2.

German Post WW2 wall, mantle and floor models

Removing mechanical clock hands for post WW2, mantle and floor clocks is quite simple. Turn the hand nut to the left while holding the minute hand with fingers. Use some small needle nose pliers to loosen the nut first. Once the nut is loose, turn it with fingers until it comes off. Then the minute hand will be able to wiggle straight off its square arbor and off of the clock. The hour hand is a friction fit, so just twist the hour hand back and forth and pull toward you until it comes off. If having a second hand bit, that is only a friction also, so just grab it with fingernails, twist pull off.

American Antique time and strike

These type of movements come in two styles. If there is a minute hand nut, the first style is the same as above. Be very careful not to lose this hand nut. They are very hard to find and replace. The second style of mechanical clock hands will have a pin holding the minute hand on instead of a nut. This pin tapers, meaning it's fat on one side and skinny on the other. Just grab the fat side with needle nose pliers and yank the pin out. The minute hand will fall out with a washer. Save the washer and the tapered pin for ease of reinstalling the hands. If these items happen to get lost, Clockworks offers washers and taper pins for purchase, as well as replacement mechanical clock hands.

The content of this website is copyright by Clockworks and written by James Stoudenmire in year 2020

German Mechanical Clock Hand Installation

The installation of the clock hands on a German mechanical movement is reverse of removal. If either the movement was replaced, or the hands are new, the minute hand must be adjusted. This is so it will point to the correct time when it chimes.

Installing the hour hand

First comes the hour hand as a friction fit. Put the hand on its round post and twist and push toward the front front of the dial. Be sure it is not in contact with the dial at any point of its travel in the circle. This includes the base of the hour hand, it cannot rub against the hole in the clock face itself. As its only a friction fit, it can be turned to point to whatever hour it is, just with the fingers.

Installing the minute hand

The minute hand installation is done by putting the square hole in the hand, on the square post of the hand shaft. The bottom of the minute hand cannot be rubbing the hour hand tube or the hour hand. If it is, the hour hand has to be set lower on its tube. With the minute hand on its square post now its time to put the hand nut on. The nut goes on finger tight and then a little bit more with needle nose pliers to make it secure.

Mechanical Clock Hands

The German mechanical clock hands are sold by the time track diameter. When ordering these mechanical clock hands, this measurement is important. To clarify, the dial diameter is the measurement of the time track. This means from just outside the 9 straight across to just outside the 3. For example, if this time track diameter is 6 inches, then select hands for a 6 inch time track in the drop down list. Hands for a 6 inch time track will have a minute hand of about 2 7/8 long from the mounting hole to the end. The proportionally smaller hour hand will come with the minute hand. This is a vastly different way of measuring than the quartz clock hands. So be sure to follow these directions for measuring and not the ones for the quartz hands.

Ordering Hands

After getting the time track diameter measurement, it is time to choose a style for the mechanical clock hand. Under each style of hand, there is a drop down menu. Look to see if the style comes in the size needed for the clock. Not all styles of hands come in the same sizes, so might have to look at the different options available. The most popular styles of mechanical clock hands are the serpentine and spade hands. Remember, the minute hand will come a little less than half of this time track measurement. The hour hand will be proportional in size to the minute hand.

How they are sent

So, when ordering mechanical clock hands, remember that they come as a pair, hour and minute hand. They ship the next business day from Clockworks in Huntington MA USA, via the method is chosen upon checkout.

The content of this website is copyright by Clockworks and written by James Stoudenmire in year 2020

Mechanical Clock Chime On Time

These are the directions to get a German mechanical clock to chime on time. This means having the clock hands point to the right spot when the clock chimes. When replacing a clock movement, or getting new clock hands, either one, you will notice it will chime 5 minutes before it is supposed to, or 10 min after, something like this. This page explains how to correct this situation. It is unbelievably fast and easy to do.

Working with the minute hand

After a new mechanical movement is installed, or if you are just installing a new set of hands, it maybe noticed the clock will not chime at the time it's supposed to. To correct this, take the minute hand off of the clock. This is the longer of the two hands. With this minute hand off of the clock, turn it upside down and look that it has a square hole where it attaches to the clock. This square hole is in a bushing that will rotate WITHIN the minute hand itself.

The correction

So, all to be done is just use needle nose pliers to turn this bushing ever so slightly. Put the hand back on the clock and see if it’s pointing to the correct place where it chimed. If it is, then it all set and it will point to the exact place it is supposed too. If it is still not right, take the hand off and try again. Once you get the minute hand to point where it just chimed you then set to the correct time.

The conclusion

It is really that easy, there is nothing to do with the clock itself, only the minute hand. In other words, to put it in a silly way, take the minute hand off of the clock and walk to the garage with it. Take it far, far away from the clock. When in your garage take needle nose pliers and turn the bushing within the hand itself. Then walk back to the clock and put it on. See if it's now pointing to the right spot.

The content of this website is copyright by Clockworks and written by James Stoudenmire in year 2020

Mechanical clock hand nuts

One of the most common parts a Mechanical clock needs is the hand nut. As previously stated, the older the clock the harder things are to find. The hand nuts Clockworks offer are for movements made after the 1930's.

Prior to 1930 clock hand nuts

There were not many standards on what the hand nut size should be on the early clocks. However, prior to around 1930 there is no telling what will work. In other words, it is literally trial and error. There was no standard hand nut size. Any hand nut we offer, may, or may not, work. This includes cuckoo hand nuts, American clock hand nuts, or German hand nuts. However, with even all of these assortments, there is a chance none of them will work on the clock.

Post 1930 clock hand nuts

Generally speaking, what we have to offer in the three types of clock hand nuts will cover most of the post 1930 Mechanical clocks. The cuckoo hand nuts fit about 80% of the post war German made cuckoo clocks. The American clock hand nuts fit many of the mechanical time strikes that were so popular. German hand nuts fit most post war German made mechanical clocks, with the exception being a few large grandfather clocks.

Clocks that do not take a hand nut

Not all clocks require a hand nut. Some antique mechanical clocks require a clock hand washer and a tapered pin instead. These secure the minute hand as an alternative to the hand nut. The washer may have a small square hole, or large, oblong or round hole. Clockworks offers an assortment of 100 clock hand washers that includes all the styles mentioned. A tapered pin is used to secure the hand with the washer on top of it. The taper pin is inserted into a hole in the end of the minute hand arbor to secure the washer and minute hand to the clock. A taper pin is a small brass or steel rod that is wide on one end and skinny on the other. Clockworks offers them in an assortment of 100 to ensure the right one is there.

The content of this website is copyright by Clockworks and written by James Stoudenmire in year 2020
Clock Hand Measurement

Seth Thomas Clock Hands

Hands that have an S T on them to represent Seth Thomas clock movements, for antique 8 day time strike units made in USA. Fits most American antique movements such as ST, Sessions, New Haven, Ansonia, Gilbert, and Waterbury. Available with a square hole or a oblong hole for the mounting hole in the minute hand. The hour hand comes with the minute hand and has a round mounting hole with a brass sleeve. It of course will be shorter than the minute hand and these hands are sold as a pair.

Fits many but not all

These are not a guaranteed fit, it usually solves the problem. The older the clock movement the more non standard things were in the clock movement making industry. This is to say these hands are the best shot at getting hands for the clock. This holds most true for movements produced in USA in the first 50 years of the 1900s.


↑ Back to top

Spade Variant Clock Hands for German Clocks

Posted on    Posted in  turned_in_not  
Mechanical Clock Hands are the arms that point to the numbers 1 to 12 so you know what time of day it is. Clock hands come in a variety of lengths.
Mechanical Clock HandsHand RemovalHand InstallationOrdering Mech HandsChime On Time FixAbout Hand Nuts

Please view these information tabs to help with getting the Mechanical Clock Hands.

Removing Mechanical Clock Hands

Removing Mechanical Clock Hands is fast and easy to do. The following are hand removal instructions for German mechanical movements post WW2.

German Post WW2 wall, mantle and floor models

Removing mechanical clock hands for post WW2, mantle and floor clocks is quite simple. Turn the hand nut to the left while holding the minute hand with fingers. Use some small needle nose pliers to loosen the nut first. Once the nut is loose, turn it with fingers until it comes off. Then the minute hand will be able to wiggle straight off its square arbor and off of the clock. The hour hand is a friction fit, so just twist the hour hand back and forth and pull toward you until it comes off. If having a second hand bit, that is only a friction also, so just grab it with fingernails, twist pull off.

American Antique time and strike

These type of movements come in two styles. If there is a minute hand nut, the first style is the same as above. Be very careful not to lose this hand nut. They are very hard to find and replace. The second style of mechanical clock hands will have a pin holding the minute hand on instead of a nut. This pin tapers, meaning it's fat on one side and skinny on the other. Just grab the fat side with needle nose pliers and yank the pin out. The minute hand will fall out with a washer. Save the washer and the tapered pin for ease of reinstalling the hands. If these items happen to get lost, Clockworks offers washers and taper pins for purchase, as well as replacement mechanical clock hands.

The content of this website is copyright by Clockworks and written by James Stoudenmire in year 2020

German Mechanical Clock Hand Installation

The installation of the clock hands on a German mechanical movement is reverse of removal. If either the movement was replaced, or the hands are new, the minute hand must be adjusted. This is so it will point to the correct time when it chimes.

Installing the hour hand

First comes the hour hand as a friction fit. Put the hand on its round post and twist and push toward the front front of the dial. Be sure it is not in contact with the dial at any point of its travel in the circle. This includes the base of the hour hand, it cannot rub against the hole in the clock face itself. As its only a friction fit, it can be turned to point to whatever hour it is, just with the fingers.

Installing the minute hand

The minute hand installation is done by putting the square hole in the hand, on the square post of the hand shaft. The bottom of the minute hand cannot be rubbing the hour hand tube or the hour hand. If it is, the hour hand has to be set lower on its tube. With the minute hand on its square post now its time to put the hand nut on. The nut goes on finger tight and then a little bit more with needle nose pliers to make it secure.

Mechanical Clock Hands

The German mechanical clock hands are sold by the time track diameter. When ordering these mechanical clock hands, this measurement is important. To clarify, the dial diameter is the measurement of the time track. This means from just outside the 9 straight across to just outside the 3. For example, if this time track diameter is 6 inches, then select hands for a 6 inch time track in the drop down list. Hands for a 6 inch time track will have a minute hand of about 2 7/8 long from the mounting hole to the end. The proportionally smaller hour hand will come with the minute hand. This is a vastly different way of measuring than the quartz clock hands. So be sure to follow these directions for measuring and not the ones for the quartz hands.

Ordering Hands

After getting the time track diameter measurement, it is time to choose a style for the mechanical clock hand. Under each style of hand, there is a drop down menu. Look to see if the style comes in the size needed for the clock. Not all styles of hands come in the same sizes, so might have to look at the different options available. The most popular styles of mechanical clock hands are the serpentine and spade hands. Remember, the minute hand will come a little less than half of this time track measurement. The hour hand will be proportional in size to the minute hand.

How they are sent

So, when ordering mechanical clock hands, remember that they come as a pair, hour and minute hand. They ship the next business day from Clockworks in Huntington MA USA, via the method is chosen upon checkout.

The content of this website is copyright by Clockworks and written by James Stoudenmire in year 2020

Mechanical Clock Chime On Time

These are the directions to get a German mechanical clock to chime on time. This means having the clock hands point to the right spot when the clock chimes. When replacing a clock movement, or getting new clock hands, either one, you will notice it will chime 5 minutes before it is supposed to, or 10 min after, something like this. This page explains how to correct this situation. It is unbelievably fast and easy to do.

Working with the minute hand

After a new mechanical movement is installed, or if you are just installing a new set of hands, it maybe noticed the clock will not chime at the time it's supposed to. To correct this, take the minute hand off of the clock. This is the longer of the two hands. With this minute hand off of the clock, turn it upside down and look that it has a square hole where it attaches to the clock. This square hole is in a bushing that will rotate WITHIN the minute hand itself.

The correction

So, all to be done is just use needle nose pliers to turn this bushing ever so slightly. Put the hand back on the clock and see if it’s pointing to the correct place where it chimed. If it is, then it all set and it will point to the exact place it is supposed too. If it is still not right, take the hand off and try again. Once you get the minute hand to point where it just chimed you then set to the correct time.

The conclusion

It is really that easy, there is nothing to do with the clock itself, only the minute hand. In other words, to put it in a silly way, take the minute hand off of the clock and walk to the garage with it. Take it far, far away from the clock. When in your garage take needle nose pliers and turn the bushing within the hand itself. Then walk back to the clock and put it on. See if it's now pointing to the right spot.

The content of this website is copyright by Clockworks and written by James Stoudenmire in year 2020

Mechanical clock hand nuts

One of the most common parts a Mechanical clock needs is the hand nut. As previously stated, the older the clock the harder things are to find. The hand nuts Clockworks offer are for movements made after the 1930's.

Prior to 1930 clock hand nuts

There were not many standards on what the hand nut size should be on the early clocks. However, prior to around 1930 there is no telling what will work. In other words, it is literally trial and error. There was no standard hand nut size. Any hand nut we offer, may, or may not, work. This includes cuckoo hand nuts, American clock hand nuts, or German hand nuts. However, with even all of these assortments, there is a chance none of them will work on the clock.

Post 1930 clock hand nuts

Generally speaking, what we have to offer in the three types of clock hand nuts will cover most of the post 1930 Mechanical clocks. The cuckoo hand nuts fit about 80% of the post war German made cuckoo clocks. The American clock hand nuts fit many of the mechanical time strikes that were so popular. German hand nuts fit most post war German made mechanical clocks, with the exception being a few large grandfather clocks.

Clocks that do not take a hand nut

Not all clocks require a hand nut. Some antique mechanical clocks require a clock hand washer and a tapered pin instead. These secure the minute hand as an alternative to the hand nut. The washer may have a small square hole, or large, oblong or round hole. Clockworks offers an assortment of 100 clock hand washers that includes all the styles mentioned. A tapered pin is used to secure the hand with the washer on top of it. The taper pin is inserted into a hole in the end of the minute hand arbor to secure the washer and minute hand to the clock. A taper pin is a small brass or steel rod that is wide on one end and skinny on the other. Clockworks offers them in an assortment of 100 to ensure the right one is there.

The content of this website is copyright by Clockworks and written by James Stoudenmire in year 2020
Clock Hand Measurement

Spade Variant Clock Hands

Hour and minute Spade Variant Clock Hands that fit most German mechanical clock movements made after 1950, for a 6 inch time track. The hands are measured by the time track diameter. A time track is the small ring outside of the numerals and the minute hand length will be about half this diameter. The hour hand is included and of course shorter. The minute hand has a 2.2mm square mounting hole, the hour hand has a 4.5mm round hole.


↑ Back to top

Serpentine Variant Quartz Hands #H13

Posted on    Posted in  turned_in_not  

Serpentine Variant Quartz Hands #H13

Serpentine Variant Quartz Hands #H13 will fit the time only clock movement from clockworks. The hour hand will have a round hole, and the minute hand will have an oblong hole. The oblong hole just fits over the movements "I" post and than the nut goes on top to hold it down.

Quartz clock hands are measured by the minute hand only, from the mounting hole to the end. The hour hand comes with the pair, but only measuring the minute hand. The hour hand will just come shorter proportionately.


Battery Quartz Clock Hands - Quartz clock hands in black and gold. Please choose the length by the minute hand only. - Clockworks
About Quartz Clock HandsDescriptionCompatibility CheckMeasuring and OrderingMounting
How to measure the minute hand

Sold as a pair with both hour and minute hands. Styles vary depending on length.

Quartz Clock Hands

Quartz Clock Hands that will fit any battery movement we offer. There are two types of quartz hands in the world. One is China standard and one is American standard. The China way of using the hands is with round holes in both the hour and minute hands. Comparatively, the American style has an oblong mounting hole in the minute hand and a round hole for the hour hand that fits what is known as an "I" shaft. All of the hands offered here fit "I" shaft movements only. In other words all of them will fit the quartz movements that we sell.

Quartz clock hand compatibility

When replacing a quartz clock movement, the old hands may fit the new movement just fine. If there is an oblong hole in the minute hand, chances are good that it will fit. The hour hand will fit the new quartz movement either way. To clarify, it is the minute hand (the longer of the two hands) that is a concern. In any event, if in doubt, it is best to order new hands for the new movement upon checking out. This way it will be all set and will have everything needed for a smooth movement swap out.

Measuring and Ordering New Hands

Quartz clock hands come together as a set, and only the minute hand is measured when replacing them. Measure it, the long hand, from the mounting hole to the tip. The shorter hand, the hour hand, comes with the minute hand and is proportionally smaller. For larger dials, more than 10 inches wide, see our High Torque movement and Hands section. As for Second hands, they will fit the high torque clock movements, however they do not come in long lengths like the minute hands do.

Mounting Quartz Clock Hands

Mounting quartz clock hands is easy. First put on the hour hand, with it’s round hole. As a friction fit, just push it on. The minute hand, with it’s oblong mounting hole, and goes on next. Fit it onto the “I” on the top of the shaft. To tighten the hands use the nut with a hole if using a second hand. Use the cap nut if not using a second hand.

↑ Back to top

Shop By Brand

Shop Hermle

Find the perfect Hermle movement for your clock.

Howard Miller

Find the perfect Howard Miller movement for your clock.

Shop Kieninger

Find the perfect Kieninger movement for your clock.

Seth Thomas

Find the perfect Seth Thomas movement for your clock.

Shop Urgos

Find the perfect Urgos movement for your clock.

Ridgeway Clocks

Find the perfect Ridgeway movement for your clock.