Cuckoo repair parts
The most common Cuckoo repair parts sold is the bellow tops and the hands. The bellow tubes are usually good to reuse on the clock, just the bellow tops have cloth that rip over time and therefore the clock will not cuckoo the time out.
Repairing cuckoo bellows
If the cloth is ripped the entire cuckoo bellows do not need to be replaced. The bellow tops only can be used. If just replacing the bellow tops it makes things easier to get the correct size for the clock. To get the proper bellow tops measure the length and width of the top only. Snap off the old tops off of the bellow tubes and clean the surface with a knife, then epoxy the new tops on the same way. Then transfer the cuckoo lift rings from the old tops to the new ones and its done.
Cuckoo Clock Repair
The help section can help with many of the most common issues the clock may have. We also have the cuckoo clock movements for post 1950 German made units. This is about 80 percent of the cuckoos out in the world so chances are we have the movement needed.
If the movement is worn out and is post 1950 its just as well to get the new one instead of restoring the old one. The process of the movement restoration is time consuming and therefore expensive. When the new movement is 100-200 dollars and will last alot longer than the best restoration.
↑ Back to top