Movements

launch

question_answer 0 Questions/Answers

View more

turned_in_notMovements

On rare occasions 451/1151 high bridge units have the suspension post longer on the new movement than the old one, although both units may be High Bridge. This may cause issues with the pendulum interfering with the chime block. This is usually no issue at all and the clock will function like it ever did. Just bend the hammers on… View Product

launch

question_answer 0 Questions/Answers

View more

turned_in_notMovements

The intent of this post is to explain the Hermle Clock Code Letters that follow the movement number on Hermle movement. Sometimes customers think that if the new movement does not have the same letter as the old unit that it will not be the same. This is not always the case. This is what follows a typical Hermle number… View Product

launch

question_answer 0 Questions/Answers

View more

turned_in_notMovements

Hermle Clock Movement – Replace instead of repair. A fraction of the price, lasts longer, ships now. Instructions and expert support. – Clockworks To get a replacement 261 Hermle Clock Movement all you need are the numbers off of the back plate. If the numbers match then the 261 Hermle Clock Movement matches. Assistance = 800-381-7458 If the clock is a pendulum unit,… View Product

launch

question_answer 0 Questions/Answers

View more

turned_in_notMovements

Hermle clock movements are among the finest movements made in the modern times. The German made Hermle units typically work night and day for 30 years without much complaint. To go and get it restored like normally would with any clock after a long time, it is found that is cost is high. This is for good reason as it… View Product

launch

question_answer 0 Questions/Answers

View more

turned_in_notMovements

To order a Hermle clock movement we need the numbers off of the back plate of the movement itself. Match the numbers up so the new movement will be exactly the same as the old one. Replacing the movement is a fraction of the price of a repair. It is also the fastest way to get the clock up and… View Product

launch

question_answer 4 Questions/Answers

View more

turned_in_notMovements

The Hermle 461 series clock movement is either chain or cable driven, three weight, Westminster chime unit. It is the same movement as the 1161 series, but Westminster only instead of triple chime. In other words it plays one song instead of three. But really, people with triple chime clocks only listen to Westminster in the end because it sounds… View Product

launch

question_answer 2 Questions/Answers

View more

turned_in_notMovements

Hermle clock movement 1050 or 1051 units are spring driven and triple chime. They are made by the Hermle clock company of Germany. All the Hermle clock movements 1050 or 1051 units have a 120mm plate size. Spring driven and triple chime movements are popular with bracket style cases. These units take a number 8 key to wind it and… View Product

launch

question_answer 0 Questions/Answers

View more

turned_in_notMovements

Hermle clock movement 1151 series is a triple chime unit. It is the most produced triple chime, chain driven unit ever made. These clock movements can work night and day for 30 years sometimes without a sweat. The customers who order this movement originally purchased there clock in the 1970’s through the 1990’s. Hermle clock movement 1151 series are all… View Product

launch

question_answer 0 Questions/Answers

View more

turned_in_notMovements

The 1161 Hermle Clock Movements are great that is why there is so many made. They work night and day for 30 years without much complaint. So here is some information on these fine German made units. The name maybe a number of makers on the movement, but it was made by Hermle not them. It may say Howard Miller,… View Product

launch

question_answer 0 Questions/Answers

View more

turned_in_notMovements

The 1171 clock movement series is the premium flagship by Hermle Clock Company. This is the largest clock movement out of all the Hermle movements produced. The thick plates make this the heaviest clock movement also. Comparable to the Kieninger HTU series. The cost is less and has a greater part availability. This is because there is alot more of… View Product

launch

question_answer 2 Questions/Answers

View more

turned_in_notMovements

The 132-071 has a platform escapement. This means is it has a balance wheel rather than a pendulum. When adjusting the timing lever it pushes or pulls the hairspring on the balance wheel. This manipulates the speed of the balance wheel oscillations and therefore the speed of the time. It is done with the lever that sticks out of the… View Product

launch

question_answer 2 Questions/Answers

View more

turned_in_notMovements

Hermle 132-071 clock movement is now equipped with a Swiss platform escapement. The quality of this escapement is much improved from the past and easier to time than ever. This ships bell strike clock movement is the only one in production in today’s world. There is no other ships bell clock movement in either mechanical or quartz other than this… View Product