Bezel Page NotesHere you will find Clock Dials Bezels and also glass. It is confusing sometimes to get the bezel and then the glass and then the dial all separate and try to put them all together, it is best to get the bezel glass and dial all together if you can so it's already made for each other. However there are limited sizes of these complete units, sometimes it will be required to get the individual component and match them all together.
Bezels and dials for spring unitsIf you have a spring driven clock the dial would need to be drilled to wind the clock. If this is the situation, we offer clock dial grommets to make the holes pretty below as well. The holes drilled would need to be 3/8 of an inch usually.
Brass Bezel Without GlassOne piece Clock Bezels. Glass is not included. Hinge and glass tabs included but not soldered on the larger sizes. Measurements are outside diameters.
BZ8: $20.00 – $60.00View Product
Brass Bezel With GlassOne piece Clock Bezels with installed glass. The hinge and glass tabs are included and soldered. The measurements listed are the total outside diameter.
BZ7: $50.00View Product
Bezel,Dial,Glass Friction FitBezel/crystal/dials feature a solid brass diamond cut bezel, curved glass lens and a metal dial and back plate. This is the friction fit style so the bezel / glass comes off by twisting and then pull off to get to the dial.
BZFCOMP: $60.00 – $70.00View Product
Flat Clock GlassFlat round clock glass gets measured from one side to the other, the overal width. Please take into account that the glass has to be wider than the opening in the bezel, but not so big that it is too wide for the glass tabs to lock it into place.
BZ1: $10.00 – $20.00View Product
Convex Clock GlassConvex round clock glass gets measured from one side to the other, the overall width. Please take into account that the glass has to be wider than the opening in the bezel, but not so big that it is too wide for the glass tabs to lock it into place.
BZ2: $10.00 – $70.00View Product